400 Milliliters
  • Montana HOLOGRAM Glitter Effect



    The new Montana HOLOGRAM Glitter Effect! Turn up the intensity and appearance of depth to any artwork or object by applying Holographic Glitter Effect. The translucent semi gloss, nitro-combi base is the vehicle carrying the high quality fine holographic glitter particles for a sensational metallic effect that can add a totally new dimension to all kinds of surfaces. From paper to cardboard, primed canvas, wood, glass, metal, ceramics, porcelain, stone, acrylic and just about any other paintable surface. Once applied, the semi gloss lacquer layer will have embed a fine distribution of fine holographic particles over the substrate. Depending on which angle you look at it from, light reflects in various colors and saturation to give an impression of 3 dimensionality. The more coats applied, the greater the saturation of the holographic particles and thus increasing the intensity of the effect. Applying a layer or more of Montana Gloss Varnish will not only protect the surface of your work, it will also allow more light to reflect on the holographic particles and enhance the effect further. The final result will significantly be influenced by the color and gloss level of the undercoat. 



    For best results we recommend applying it over Montana GOLD, Shock Black SH9000 or a dark colored underground that has had time to cure, allowing contrast to occur for the glitter particles to reflect on. The Hologram Glitter spray’s clear base can easily be covered with many common lacquer types. We recommend using it in conjunction with Montana GOLD, Montana ACRYLIC markers and conventional acrylic paints. (Not compatible with Synthetic based paints!). 


    Shake Well! Due to the weight of the pigments, for best results it is important to shake the can well for at least 3 minutes before starting and to re-shake for at least 10 seconds after each spray application regardless of the time between sprays. This will guarantee the pigments are correctly mixed with the paint vehicle. The Hologram Glitter Effect spray is best applied to a smooth level surface to show greater light variation. Undulations in the substrates surface may detract from the impact of the holographic effect. Application of multiple, thin, light coats will build up the particle saturation and intensify the effect. 


    surfaces should be clean and dry

    shake can well for 2-3 minutes!

    apply the spray at a distance to the object of 20 - 30cm 

    best holographic effect can be achieved on even surfaces

    the darker the surface, the stronger the effect

    prime object black with Montana GOLD Shock Black S9000

    let undercoat fully cure

    apply several thin even layers

    allow min. 5 minutes drying time between coats

    shake the can well again after pausing to avoid sedimentation of glitter particles

    the more layers, the stronger the hologram effect

    dust dry after approx. 10 min

    touch dry after approx. 60 min

    fully cured after approx. 24 hours


    +52 81 1169 2889